AeroWest Current Inventory.
Contact us for any of your tooling needs at: (786) 367-6948. Thank you for your business.
J38001-16
PRESSURIZATION EQUIPMENT - WASTE DRAIN SYSTEMThe pressurization equipment is used for blockage removal between the
waste tanks and the external service panels. The pressurization equipment
is also used for the waste valve functional test. B777
J21001-79
B777 - HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACKThe hoist adapter equipment is used to lift and move the air conditioning pack for removal and installation B777.
J78003-27
Hold Open Eqpt - GE90 Fan Reverser B777Hold open equipment is used on all 777 airplanes equipped with GE90 engines. This tool is used to hold open the GE90
fan reverser in up to a 40 knot wind gust. The J78003-27 hold open equipment includes two J78003-28 hold open assy’s.
MIT65B01202-1
WRENCH AXLE NLG/MLG – B747
A27114-1
Removal / Installation Equip - Pivot Bearing H/S Tool- B767Used to remove and install the Pivot Bearing on the Horizontal Stabilizer -B767
A28007-40
Fuel Qty Tester B767-200ER/300ERThis tool is used in place of fuel qty processor unit when performing fuel qty indicating system test. This tool is used on 767 airplanes with Honeywell FQIS systems only. This tool is used on 767 airplanes line number 1 thru 430 only. The -40 is used on 767-200ER and 300ER airplanes.
856A2608G01
Locking Adapter Engine Core -CFM56ADAPTER, LOCKING ENGINE CORE -CFM56
3MIT65B90100-2
Wrench Hex Strut Installation B747Wrench Hex- Wrench used on the Strut Installation, upper link, front spar B747
3MIT65B90100-1
Wrench 12PT Strut Installation B747Wrench 12pt – Wrench used on the Strut Installation, upper link, front spar B747
B71027-1
Eng Handling Sling B757 PW2000This tool is used for handling the PW2000 Series engines with or without the nose cowl. This tool consists of a beam assembly, a ballast assembly, two link assemblies, a pad ssembly, related components and hardware.
B71006-79
Hold Open Equ C Duct B757-RB211-535This tool is used with the B71001 Handling Equipment to open or hold open the ‘C’ ducts when the engine and ‘C’ duct actuator have been removed.
A32008-53
SLING EQUIPMENT - (MLG) COMPONENTS B757/B767A32008-53 is used on both 757 and 767 airplanes. A32008 is used with the A20001 boom hoist for removal or installation of the main landing gear drag strut and side strut.
0U190360
Rigging Pin THS ActuatorThis tool is used to lock the THS actuator mechanical input lever prior to removal/installation of the actuator and/or setting theactuator in the zero position. A318-A319-A320-A321
2C6894G02
Removal Tool - Fan SpinnerRemoval Tool – Fan Spinner
C78010-1
C-Duct Latch Tool T/RUsed to help latch close the thrust reverser
halves. Applicable to 737-300/-400/-500 only.
2C6894G04
Removal Tool - Fan SpinnerRemoval Tool – Fan Spinner
G32007-1
G32007-1 -Protector - Axle B747-400 & 400F Wing & Body Landing GearUsed to protect the MLG axle from damage while wheels are
off and during brake removal and installation.
F72977-26
Brake Bleed Adapter B727-B737-B747-B757-B767Equipment is used during maintenance to bleed the brakes.
B27065-12
Circuit Breaker Lock - B757Lock – Circuit Breaker – Used to lock circuit breakers in the open position during maintenanceprocedures. B757
B32019-1
NLG Shock Strut Restraint - Strap - B757This strap assembly is used to lock the NLG shock strut into a depressurized position during groundmaintenance operations. Applicable B757 Aircrafts.
B32001-4
Downlock Pin- MLG & NLG - B757This pin is used on the main and nose landing gear to prevent accidental retraction during ground operations. Three pins are required. Applicable B757 aircraft.
0U190364
Oil Drain AdapterUsed to drain oil from the THS actuator.
98D27604000000
Safety Spoiler Collar - A320Used to lock the spoilers in the extended position by fitting around the spoiler actuator ram.
F70199-52
Tire Inflation Tool - DigitalUsed to inflate and control the tire pressure on the landing gear for all Boeing Aircrafts. This tool consists of air chucks for both large and small bore tire valve stems and a digital gauge.
V800-002
Rubber Boot Replacement for - V800 TOOL SUMP DRAINRubber Boot Replacement for – V800 TOOL SUMP DRAIN
F80184-1
RIGGING PROTRACTOR - NOSE GEAR STEERING B737RIGGING PROTRACTOR – NOSE GEAR STEERING USED TO MEASURE STEERING ROTATION OF THE NOSE GEAR WHEN THE STEERING RIGGING PROCEDURE IS ACCOMPLISHED. B737 Aircraft
F80017-33
Safety Lock - Ground Flight Spoiler B737-100 thru -500The outboard flight spoiler locks are used to prevent inadvertent
retraction of the spoilers during maintenance operations. The F80017-33 are used on 737-100 through -500 airplanes with chamfered clevis.
F72786-181
Stall Warning Components Test Set - ProtractorUsed to test the stall warning system, either on the bench or on the aircraft. Comes with F72786-101 portable Calibrator. B727 100/200 -B737 100 thru 500 & B747
F27093000
Piston Ring INSTALLATION TOOL - Messier Dowty IncPiston Ring INSTALLATION TOOL – Messier Dowty Inc
98F27508206000
GAGE END STOP ACTUATOR FLAP - A330/A340These filler gauges are used for the adjustments of the actuators in the retracted and extended position, under no-load or load conditions. Set of 6ea gauges.
C78005-53
T/R OPENING SYSTEM HAND PUMPUsed to open the thrust reversers.
MSE-54
Fan Blade ToolFan Blade Tool
856A2691G01
Fan Blade Spacer PliersFan Blade Spacer Pliers
GLDH-342NP
Snap On Scoket Double HexSnap On Scoket Double Hex
J47549
NLG Axle Wrench A319/A320/A321Used for tightening and loosening the nut, securing the wheel to the NLG.
H47682
WRENCH AXLE MLG -A319/A320/A321Used for the removal and installation of the MLG wheel axle nuts.
HIX3008
Safety Lock-out Pin Thrust Reverser A319/A320/A321Used to make the thrust reverser unserviceable for maintenance operations. A319/A320/A321
F46754-1000
PROTECTOR AXLE MLG A319/A320/A321Used for protecting the wheel axle thread and main gear liner during wheel installation.
D22333000
Safety Lock Pin MLG - A310Used to prevent any ground unlocking of the MLG
D23304000
PIN LOCK SAFETY NLG A330/A340Used to lock the NLG in the lock position. A330/A340
AXG7000-501
PIN ASSY DOWNLOCK LANDING GEAR- DC10 / MD11Used to prevent main, nose and stering retraction while on the ground.
98D27603002001
SPOILER MAINTENANCE KEYUsed to set to spolier servocontrol to manual the position and lock it in position. A319/A320/A321
98D32203502000
PIN LOCK DOOR NLGPIN LOCK DOOR NLG – Safety Pin used to lock the nose gear doors – A318-A319-A320
701-2978000
Pin Safety - Passenger Crew DoorA320 Used for the FWD/AFT passenger crew doors LH & RH to secure the passenger door damper and emergency operation cylinder during any maintenance operation
856A1130G10
TOOL SET - JACK SCREWSUsed to separate the various case flanges and subassemblies at their rabbeted joints.
856A2501G01
Wrench VBV Man CtrlUsed to manually operate the Variable Bleed Valves – A319-A320-A321
460007280
MLG ACTUATOR SAFETY LOCK-A319/A320/A321Used to lock the MLG in the lock position, by fitting around the lock link actuator ram.
2MIT65B04011-41
Pin Safety - NLG Rig and Tow Pin - B747All 747 A/C.Used during airplane towing to hold the nose gear steering metering valve in the neutral position in order to allow
hydraulic fluid to bypass from one steering cylinder to the
other.
460007174
PIN SAFETY LOCK MLG A330/A340Used to lock the MLG in the down position.
0U145409
Socket Wrench Flight ControlSOCKET WRENCH – FLIGHT CONTROL AIRBUS
0U190857
THS Jamming Simulation Tool - A318/A319/A320/ A321This tool is used for the adjustment/test procedure during the THS Hydraulic actuation.
2916700-1
PIN LOCK SAFETY MLG- B717/DC9/MD80/MD90-30Used to lock the main gear in the down position while the airplane is on
the ground.
2916700-501
Nose Landing Gear Downlock Pin -B717/DC9/MD80/MD90-30Used to lock the nose gear in the down position while the airplane is on
the ground.
98D27504038000
KIT FLAP RIGGING – A320